Faded, Streaked or Blank: Reading Your Prints
A disappointing page is a clue. The pattern of the problem usually points to its cause.

Before replacing a cartridge, look closely at the page. Faint all over, missing lines in one direction, a single colour absent, or a totally blank sheet each tell a different story.
Faded all over
Uniformly pale output often means low ink or toner, or a draft or economy mode set in the print dialog. Check the quality setting before assuming a supply is empty. On laser printers, gently rocking a toner cartridge side to side, as the manufacturer describes, can redistribute toner temporarily.
Horizontal streaks or missing lines
On inkjets, lines that run across the page usually indicate partially clogged nozzles. Most printers include a nozzle check and a cleaning cycle in their maintenance menu. Run one cleaning, print a check page, and pause before repeating, as each cycle uses ink.
Vertical lines or repeated marks
On laser printers, a streak running down the length of the page, or a mark that repeats at regular intervals, often points to the drum or another roller. Refer to your model's documentation before handling these parts.
Blank pages
- Protective tape or a seal still on a new cartridge.
- A cartridge that is not fully seated.
- The wrong paper size or a document that is genuinely empty on that page.
- Severely clogged nozzles on an inkjet that has been idle for a long time.
Paper matters more than people expect
Damp or very glossy paper can cause smearing and poor ink absorption. Choose the paper type that matches what is loaded, and store paper flat in a dry place.


