Bringing an offline printer back
Nine checks in the order that solves the most cases with the least disruption.

Before you begin
- Access to the printer's control panel or status lights
- Your Wi-Fi network name, if wireless
- A few minutes without urgent print jobs
- 01
Read the printer first
Look at the display or lights. A paper, cover or supply error can surface on the computer as offline. Resolve anything the printer itself reports.
- 02
Check the physical connection
For USB, reseat both ends and try a different port. For wired networks, confirm the cable and the link light. For Wi-Fi, check the wireless indicator.
- 03
Confirm the same network
Print a network configuration page from the printer. Its network name should match the one your computer uses. Guest networks and client isolation block printing even with full signal.
Different bands of the same home network usually communicate normally.
- 04
Open the print queue
Look for jobs marked error or paused. Select them and choose cancel. Wait a moment for the queue to clear.
- 05
Turn off 'use printer offline'
On Windows, this option sits in the queue window's Printer menu. If it is ticked, untick it.
- 06
Restart in order
Turn off the printer, wait thirty seconds, turn it back on and let it fully start. Then restart your computer. Restart the router only if other devices also have trouble.
- 07
Restart the print service gently
On Windows, the Print Spooler service can be restarted from the Services app. Restarting is enough; avoid deleting system spool files unless official guidance tells you to.
- 08
Remove and re-add the printer
Removing the printer entry and adding it again lets the computer discover the device at its current address.
- 09
Verify with a test page
Print a test page. If it succeeds, consider asking your router to reserve the printer's address so it stays consistent. Your router's documentation explains how.